4 outputs dimmer module (EDR-D4)

From eedomus - Documentation

Jump to: navigation, search


Edisio website : http://www.edisio.fr


TYPE DEVICE EEDOMUS
PARAMETERS
COMMENT DOCUMENTATION

Binary actuator / Edisio / Edisio

4 outputs dimmer module (EDR-D4)



Requires an Edisio extension in order to operate with the eedomus controller

The configuration switches should be positioned in dimmer mode
The 1st channel is automatically associated during the detection of the device. The others must be manually associated (Press N time on 'R' then execute an On or Off on the corresponding actuator on eedomus, then press again on 'R')

Manuel d'utilisation EDR-D4 FR.pdf