Eedomus and Orvibo

From eedomus - Documentation

Jump to: navigation, search

Contents


What is the Orvibo AllOne?

The Orvibo AllOne is a WiFi IR remote control for audio, video and air conditioning systems.

With eedomus you can record IR commands of your choice, and then run them on demand through the eedomus application, via macros, or by rules and programming.

Set-up

Click on Configuration/Add or remove a device/Add another type of device/Orvibo AllOne/Create

Click next on the link that allows you to discover the IP address and the MAC address of your Orvibo AllOne.

You can copy and paste those values on your eedomus Orvibo configuration. Then click create.

Use

By default, the device will automatically create one button in the Values tab, select this line and click Test. Click on the Learn button, then when the LED on your Orvibo AllOne becomes red you can press the button you like on the IR controller. That's it, the button is now programmed and you can use control it from your eedomus.

Adding additional buttons

In the Values tab of your Orvibo device, click on Add, copy the URL of the line above, paste it in the new line, then click Save and continue editing followed by Test. On the new page that opens, click on Learn and press on the button of choice on your IR controller when the LED of your Orvibo AllOne becomes red. That's all, your new button is operational.