Electric valve Living Connect thermostat (RA2000)

From eedomus - Documentation

Jump to: navigation, search


Danfoss website : http://www.danfoss.com


TYPE DEVICE EEDOMUS
PARAMETERS
COMMENT DOCUMENTATION

Thermostat / Z-Wave / Danfoss

Electric valve Living Connect thermostat (RA2000)

Include/Exclude: Press on the "Select" buton of the valve
Default Z-Wave group for the eedomus controller: 1
Secured inclusion: unsupported

Only compatible with the eedomus+ controller

The setpoint instructions will be executed during the wake up of the device (every 30min by default)
Conversely, updating a setpoing on the valve is almost immediately sent to eedomus.

Warning Choose a valve stamped Z-Wave (Reference 'Living Connect Z' code or 014G0012 014G0012) because Danfoss now produces two ranges with and without Z-Wave.

Use the latest model (0014G001).

Danfoss_Living_Connect.pdf
Danfoss_Living_Connect_2.pdf
Z_wave_commands_VDFNN202_teamcent.pdf
living-connect_Z datasheet.pdf