Flush Shutter (ZMNHCA2)

From eedomus - Documentation

Jump to: navigation, search


Qubino website : http://qubino.com


TYPE DEVICE EEDOMUS
PARAMETERS
COMMENT DOCUMENTATION

Shutter module / Z-Wave / Qubino

Flush Shutter (ZMNHCA2)

Include/Exclude: Auto-inclusion (30 minutes after powering) or press more than 2 seconds on the "S" button or 3 times on the button "I1".
Default Z-Wave group for the eedomus controller: 2
Secured inclusion: unsupported



Supply power may be 110-230 VAC or 24-30 VDC

A themometer may be connected to the module.

If the thermometer is not used, simply disable the corresponding widget.

Qubino_Flush shutter user manual_V6 0_fra.pdf
Qubino_Flush-shutter-user-manual_V3-0_eng.pdf