Panic watch

From eedomus - Documentation

Jump to: navigation, search


BeNext website : http://www.benext.nl


TYPE DEVICE EEDOMUS
PARAMETERS
COMMENT DOCUMENTATION

Panic button / Z-Wave / BeNext

Panic watch

Include/Exclude: Press and hold the SOS button until the LED begins to flash, then release the button to start the process of inclusion or exclusion
.(Note: Normally the button must be pressed for 2 seconds but if the device is already included it can take up to 12 seconds until the LED flashes)
Default Z-Wave group for the eedomus controller: 1
Batteries: 1x CR2032 (Lithium 3V)
Secured inclusion: unsupported



_BE_PANICWATCH_M.pdf