Thermostat (SCS317)

From eedomus - Documentation

Jump to: navigation, search


Horstmann/Secure website : http://www.horstmann.co.uk


TYPE DEVICE EEDOMUS
PARAMETERS
COMMENT DOCUMENTATION

Thermostat / Z-Wave / Horstmann/Secure

Thermostat (SCS317)

Include/Exclude: Proceed with Reset network then Setup / Set up Z-Wave / Learn / Enter)

Default Z-Wave group for the eedomus controller: 1
Batteries: 2x AA (1,5V)
Secured inclusion: unsupported



To trigger the immediate wake up of the device, use the command NIF (Useful to quickly validate a new Z-Wave setting)


This device has an issue: it ignores groups that are assigned at the time of inclusion.

One must therefore manually associate the box eedomus to group 1.

The wake up time (30min) is not taken into account during the inclusion, so it must be manually set after inclusion, otherwise the changes in the thermostat would be very long to appear.

The control of the thermostat modes (Holidays, Stand-By) is not available in Z-Wave (You can use a low setpoint Frost, 5 ° C)

This device does not properly back its routing information. Therefore do not take into account information of the radio matrix.

secure_scs317_scs318_user_manual_us.pdf
secure_scs317_scs318_installation_manual_us.pdf
SCS311SCS317_Installation_-_P85161_1_WEB.pdf