High Load Switch with thermostat functions (HE-HLS01)

From eedomus - Documentation

Jump to: navigation, search


Heltun website : https://www.heltun.com


TYPE DEVICE EEDOMUS
PARAMETERS
COMMENT DOCUMENTATION

Binary actuator / Z-Wave / Heltun

High Load Switch with thermostat functions (HE-HLS01)

Include/Exclude: a) if you want to use the device as a 'Binary Switch', double-press the service button on the device (with no more than a one-second interval between presses).
b) if you want to use the device as a 'Thermostat', press four times the service button on the device (with no more than a one-second interval between presses).
Default Z-Wave group for the eedomus controller: 1



Heltun_HE-HLS01_User_Manual_B21AM.pdf